Tips For Replacing a Window Handle
Changing the handle on your window is an easy project that can be accomplished in the at-home comforts of your home. Follow these guidelines to ensure a smooth and beautiful finish.
Start by removing the screw covers to expose the screws within the uPVC window handle. Make sure you measure the spindle in order to make sure you're getting the right size replacement.
1. Measure the Spindle length
When replacing a window handle it's important to get the size of the spindle right. This is because it can determine how tight or loose the handle is, and whether it will lock correctly inside the window frame. The spindle is a metal shaft that connects the handle to the lock inside the frame of the window. The spindle is available in either the standard 8mm cross-section for industry or the older versions that measure 9mm. Modern industry standards are 8mm but it wasn't always the case. It is important to confirm the measurements before purchasing the handle you want to purchase.
Take the handle off. This can be done easily by turning the handle to the open position, and unscrewing two screws that keep the handle in place (which are often hidden behind plastic caps which must be removed). Once the handle is removed, measure the distance from the base to the end. This will give you the measurement required to purchase a replacement.
There are many options when you're looking to select a new window handle. From sleek chrome that will fit in with a modern style, to traditional bronze with a burnished finish that looks stunning in restored Georgian rooms, or even the more classic Tudor Cottages with curled mongoose tail latches. The possibilities are endless, but the most important thing to do is choose a style that complements your home.
Espag handles are typically fitted to uPVC windows and are identical in size, with 43mm centres (2 fixings). Cockspur handles can vary between 58mm and 62mm, but luckily there are replacements available for both sizes. Window handles made of Cadenza have distinct dimensions as they feature an bent blade that is used to operate the multi-point lock mechanism within the window.
Another consideration when selecting the right window handle is knowing which hand you need to use, which is defined by the hand you use to open the door. Inline espag handles can be used for left or right-handed windows. Cranked window handles are hand-operated and can only be used on windows that open in only one direction.
2. Take the handle off
The handle may be damaged or worn out or simply worn out, a window handle that falls off can be a real pain. But the good news is that replacing a uPVC window handle is a straightforward job that you can do yourself. You'll need only a few basic hand tools as well as some time to complete this process.
You will need to first open the window and make sure it's not locked. Then, remove the screws that hold the handle in place. Once these caps are removed, you are able working on the removal of the handle itself.
The handle is attached to a spindle inside the window frame. The handle is fixed by either a screw or pin according to the type of handle. The most commonly used types of handles are inline Espagnolette handles and cockspur handles. Both these types of handles are utilized on casement windows, including aluminium windows. They can be locked by using keys to prevent the opening of the window from the outside or you can lock them by turning the handle clockwise.
To remove the handle you will require a flat-bladed screwdriver. When this clip is released the handle will slide off the spindle. Once the old handle is removed, you'll have to determine the length of the spindle and ensure that the new handle will fit.
Once you have decided on the correct size for the handle, you can screw it into place. It is important to make sure that the new handle is firmly secured and that it is turning in the correct direction (clockwise for open or counterclockwise for closed). It is also essential to make sure that it has not been installed upside down.
Replace the screw caps. Once you have done this then you can test the handle to ensure that it works properly. It is also recommended to test the locking mechanism by moving the handle from the locked position and then back again.
3. Take off the Screws
A uPVC window handle is an integral component of every home and is usually the first item to show signs of wear and wear or damage. This could be due natural factors, regular use, or even damage caused by criminals looking to gain access to your home. A simple repair can fix the issue and stop it from occurring again.
UPVC handles can be difficult to open if the locking mechanism isn't functioning correctly. Often, the problem can be solved by replacing the multipoint lock instead of the entire handle. It's certainly worth checking this as it can save you money.
After you've removed the old handle, you'll need to remove the screws that held it in place. These are typically located on the inside face of the base of the handle. It is possible to use a screwdriver to accomplish this. Be cautious not to over tighten the handle since this could cause it to become loose.
Then, you'll have to locate the pins or screws that hold the handle in place. These are likely to be located on the inside of the handle base and you will need to use an screwdriver or a pair of pliers in order to remove them. After you have removed them, you'll be required to replace the caps on the screws in the event that you want to do so and test the new handle to make sure it's working properly.
Install the handle by aligning the spindle with the cutout in the window mechanism. Then, screw it in. If you're looking to replace the screws make sure that the handle is in an open position and any screws are securely fixed. After this is done, you're done and can enjoy your new window handle. I hope this will enable you avoid having to pay for costly window and door replacement services in the future. Contact us if you require more information on this or any aspect of your uPVC window.
4. Install the new handle
The procedure of replacing a damaged window handle or updating it is simple and can be completed within a few easy steps. The first step is to determine the type of handle, determine its spindle and identify the tools you'll need to complete the job. Safety is always the first priority when working with windows and tools. It's also important to be patient and follow the steps carefully to ensure that you have a functional handle that is safe to use.
The first step is to locate the screws holding your existing window handle in place. Then, remove them, while keeping a safe hold on the handle to prevent it from falling suddenly and injuring yourself. Once the screws have been removed, you can place them in a secure location to be replaced later.
After the handle that was used previously is removed, you are now able to begin to install your new one. It is crucial that the handle is fitted perfectly to ensure it functions correctly and locks the window in place. Next move the square metal bar on the handle into the window mechanism hole.
Now that the new handle is installed, the final step is to replace the caps on the screws and check to see if it works. If you aren't satisfied with the results or if your window does not open and close properly Contact our experts for help.
Almost all homes in the UK have uPVC windows and as they are, a lot of them will have to be replaced because of wear or damage. Anyone with a bit of DIY expertise can carry out the process. The most important aspect in the success of this procedure is to ensure that you're using a replacement handle that is compatible with your window's size and design. If you're not sure what type of handle you need, feel free to contact our team who can guide you through the possibilities available.